冷熱沖擊試驗箱_快速温变_恒温恒湿_高低温_试验箱_有码在线家
熱門搜索: 快速溫變試驗箱 高低溫老化試驗箱 淋雨試驗箱 UV紫外線老化試驗箱 三綜合試驗箱 pct老化試驗箱 砂塵試驗箱 振動沖擊試驗台 氙燈老化試驗箱 恒溫恒濕試驗箱
pct老化試驗箱
氙燈老化試驗箱
恒溫恒濕箱
三綜合試驗箱

冷熱沖擊試驗箱ASTM G154-16标准介紹

2018-12-07

本页面标准信息均来源于网络收集,或由参与标准制定的供应商提供,只作为参考使用,为确保测试结果的准确性、节省您的时间,如需ASTM G154-16标准详细信息或ASTM G154-16具体测试方法,欢迎与我们技术人员联系或给我们留言,我们将为您相关的有码在线。

 

ASTM G154-16标准介紹

ASTM G154-16是个关于暴露在阳光日晒、持续潮湿、加热而导致有码在线性能老化的测试方法,现行标准修订于2016年。

 

1. Scope

1.1 This practice is limited to the basic principles for operating a fluorescent UV lamp and water apparatus; on its own, it does not deliver a specific result.

1.2 It is intended to be used in conjunction with a practice or method that defines specific exposure conditions for an application along with a means to evaluate changes in material properties. This practice is intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual usage. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure.

Note 1: Practice G151 describes general procedures to be used when exposing nonmetallic materials in accelerated test devices that use laboratory light sources.

Note 2: A number of exposure procedures are listed in an appendix; however, this practice does not specify the exposure conditions best suited for the material to be tested.

1.3 Test specimens are exposed to fluorescent UV light under controlled environmental conditions. Different types of fluorescent UV lamp sources are described.

Note 3: In this standard, the terms UV light and UV radiation are used interchangeably.

1.4 Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G151 and ISO?4892-1.

Note 4: General information about methods for determining the change in properties after exposure and reporting these results is described in ISO?4582 and Practice D5870.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.7 This standard is technically similar to ISO?4892-3 and ISO 16474-3.

 

2. Referenced Documents

ASTM Standards

D5870 Practice for Calculating Property Retention Index of Plastics

D6631 Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G177 Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface

ISO Standards

ISO 16474-3 Paints and VarnishesMethods of Exposure to Laboratory Light SourcesPart

 

3: Fluorescent UV Lamps

ISO4582 PlasticsDetermination of the Changes of Colour and Variations in Properties After Exposure to Daylight Under Glass, Natural Weathering or Artificial Light

 

ISO4892-1

QUV老化试验箱用于ASTM G154 cycle-4的测试方法


 

▼ASTM G154-16第三方检测机构

以上标准信息来自互联网搜索整理,如需了解完整的ASTM G154-16的信息或ASTM G154-16标准解读,欢迎详询。

關鍵詞: ASTM G154-16标准介紹
Copyright ? 广东艾思荔检测仪器有限公司. 有码在线 Reserved 站點地圖(XML) 站點地圖(HTML) 粤公网安备 44190002001125号 有码在线:粵ICP備09006556號-55
在線客服
售後咨詢
撥打有码在线
發送郵件