冷熱沖擊試驗箱-快速温变-恒温恒湿-高低温-试验箱-有码在线家
熱門搜索: 快速溫變試驗箱 高低溫老化試驗箱 淋雨試驗箱 UV紫外線老化試驗箱 三綜合試驗箱 pct老化試驗箱 砂塵試驗箱 振動沖擊試驗台 氙燈老化試驗箱 恒溫恒濕試驗箱
pct老化試驗箱
氙燈老化試驗箱
恒溫恒濕箱
三綜合試驗箱

冷熱沖擊試驗箱ASTM F2366-05标准介紹

2018-12-07

本页面标准信息均来源于网络收集,或由参与标准制定的供应商提供,只作为参考使用,为确保测试结果的准确性、节省您的时间,如需ASTM F2366-05标准详细信息或ASTM F2366-05具体测试方法,欢迎与我们技术人员联系或给我们留言,我们将为您相关的有码在线。

 

ASTM F2366-05标准介紹

ASTM F2366-05是关于使用配备窗玻璃滤光器的氙灯设备测试喷墨印刷品的相对光稳定性的标准测试方法:

本测试方法规定了依照G151和G155测试方法对喷墨纸张印刷品进行氙灯曝露测试的具体程序和测试条件。现行标准的版本是2012年修订的ASTM F2366-12。

 

英文摘錄
1. Scope

1.1 This practice covers specific procedures and test conditions that are applicable for xenon-arc exposure of ink jet media prints conducted in accordance with Practices G151 and G155. The laboratory accelerated procedure is intended to determine the relative lightfastness of ink jet prints in office environments where window filtered daylight is used for illumination.

1.2 The two criteria used to determine relative lightfastness are instrumental color change and change in optical density.

1.3 This practice is useful in determining the relative lightfastness of a series of prints or the relation of the lightfastness of the print of interest to the performance of controls with known lightfastness exposed simultaneously.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in section 8.

1.5 There is no equivalent ISO standard.

 

2. Referenced Documents
ASTM Standards

D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials

D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

D3424 Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

E1347 Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry

E1348 Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry

E1349 Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry

G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials

G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

 

▼ASTM F2366-05第三方检测机构

以上标准信息来自互联网搜索整理,如需了解完整的ASTM F2366-05的信息或ASTM F2366-05标准解读,欢迎详询。

Copyright ? 广东艾思荔检测仪器有限公司. 有码在线 Reserved 站點地圖(XML) 站點地圖(HTML) 粤公网安备 44190002001125号 有码在线:粵ICP備09006556號-55
在線客服
售後咨詢
撥打有码在线
發送郵件